Laundry Splash guard

A splash guard designed to protect your walls from detergent or fabric softener that splashes out from dispensing.

Designed to be a compressive fit on Tide and Downey bottles, but may fit other brands, the diameter of the opening is 1.69" for a tight fit. 

Printed at .20 layer height

20-25% infill is recommended.

printed with PETG/PLA/PLA+

supports are required, I printed mine lying flat and only allowed supports to support the setback, and the arch. although the arch should not need supports.

2 models provided, one with a .5" setback and one with a .7" setback for slightly deeper overhang of the spout.