Magnetic door catch

Greetings and salutations,

This door catch is used in my filament cabinet project, it features 2 embedded magnets and fastens with M3 nuts and bolts.

You will need:
3x M3 nuts and bolts per door catch
2x 12x2mm round magnets
These can be found at any local hardware store

Print instructions:
Layer height: 0.2mm
Infill: 10-25%
Support: None
Note: You will have to add a print pause at layer 18 for rectangle catch and 21 for cam shape catch (depending on orientation) in order to embed magnets.

Print time: 40min/set
Filament used: 5g/set

This is part of my filament cabinet I've built. Below is a link to the hinges and door knob I designed and use:
https://www.printables.com/model/263096-small-hinge
https://www.printables.com/model/309080-cabinet-knob