Cyberpunk Purse

Welcome to the future - print yourself this stylish cyberpunk purse!

Apart from the chain there is no extra hardware needed. It's also quite easy to print and won't need any supports.

Installation guide:

Cut a 1.75mm piece of filament to about 8mm and insert it using pliers (but be careful not to break anything). Repeat for both hinges. Install the chain and you're all set!

Have fun with this purse!

Changelog:

• 10.11.2020: Date of release

+++++++++++++++++++++++++++++++++++++++++++++++++

If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs!

Happy printing!

Print instructions

Print as aligned, and use any material!
Use .3MF for pre configured settings!