Gravity Knife V1

Fully 3d printed replica of the Reate exo gravity knife.

Update V1.5

I Have added files for a Tanto blade (split in halve or as 1 piece), I have also taken 1mm off the top of the blade pins as a user suggested to help with tolerances as well as add a combined version of the drop point blade if you want to print it standing instead.

I would recommend printing both halves of the blade, the blade pins and blade insert at 0.1mm layer height and everything else can be printed at 0.2mm.

All of the files are orientated for the best results.

Video of how it works:

https://www.youtube.com/shorts/Dh6n3iah2aM

Assembly

• Attach the latch to the handle with the both the back pins gluing the back pins together
• Put the blade together by gluing both halves with the blade insert to help align them
• Test the tolerances between the blade and the handle first before gluing the blade pins on.( if you need, sand the blade down a tiny bit for a nicer fit.)
• Finally glue the blade pins onto the blade, putting them through the track in the handle.