Face-mount name plate

I wanted a durable label for a tool bags. Fastener and captured nut are #6 size and fastener needs to be at least 3/8" (~9mm) long to reach through captured nut. I obviously used a much longer fastener and have not cut the tails off yet.

Files include a 6" wide plate and a 4.5" wide plate.

Native Solidworks files available below.
I planned to use this on a fabric bag so I used a punch to create the hole. This file would work well on rigid material as well.

Text addition in V2.6 Prusa Slicer is simple using the text tool. Until then you're on your own!

You will need to print one TOP and a corresponding BOTTOM part if you're just using the .step files. 3MF files include both top and bottom.