Taverns of Tiefenthal Organizer

This is an organizer for the boardgame Taverns of Tiefenthal. It is intended for quick setup and teardown. It should support sleeved cards, but I didn't have any handy so if someone tests it please post a comment.

Print the following:
4 Player boxes: The hold all player pieces except for the base tavern boards and the table board.
2 Card holders: These hold employees and guests and can be put right on the table to start playing.
1 Noble cardholder: This holds the noble cards and the 4+ cost guest cards.
3 Stuff boxes: 1 for the Schnaps module, 1 for the signature tokens and 1 for the first player and round marker. You can choose whether you want rounded or sharp edges. If you want to leave the first player token assembled or have a custom one: print the Stuff_Spacer and put the marker on top of the noble cards.
1 Bards box: This holds the Starting cards module and the bards module.

If you intend to store the box vertically or carry it around/shake a lot I recommend printing 2 of the Spacers to keep all the boxes in place.

The pictures show how everything fits in the box.
Let me know if you have any questions or comments.

Print instructions

Printer Brand: Creality

Printer: CR-10S

Rafts: No

Supports: No

Resolution: 0,6

Infill: 10%

Notes:

Used a 0.8mm nozzle