Wingspan Organizer

This is an organizer for the boardgame Wingspan. It fits sleeved cards (Sleeve Kings 60 microns in my case).

I had 2 main reasons for this:

1. I wanted to get rid of the baggies and still fit everything in nicely with the original components.

2. Once sleeved, not all cards fit back into the plastic tray.
   Here's how it works:
   Player: Print 5 of these they fit perfectly into the birdhouse base and provide enough room for the cubes and some custom printed birdhouses as well as the starting food.
   L1: This one holds the Automa cards.
   L2: This holds the objective cards and can be used as a tray right on the table.
   L3: This holds the dice and round objective tiles and can stay in the box.

   In case you are wondering about the poor print quality: I am currently trying out a 0.8mm nozzle and am still dialing in the settings. The total print time for all the boxes was a little over 5h.

Print instructions

Printer Brand: Creality

Printer: CR-10S

Rafts: No

Supports: No

Resolution: 0.6

Infill: 15%

Notes:

Used a 0.8mm nozzle.