Black Angel Organizer

Here's an organizer for the board game Black Angel.

This one was a challenge since the boards sizes are so weird in comparison to the box size. There is also a lot of empty space in the box which I tried to fill in the most filament efficient way I could think of without over-engineering the whole thing.

So in the end it came down to a total of 9 items that are intended to be used as follows:

Player: Print 4 of those to store the player pieces for each color.
Player_special: Decided to make another, fancier version with dedicated slots for discs and tech tiles. You can choose which version you want to use.
Dice: This is for dice storage and can stay in the box.(Note: I changed the design after I printed mine so in the pictures this is 2 parts)
Res: Used for the resources, debris, and ships. Can be taken out and put on the table.
Tech: Holds all tech tiles, first player marker, Spes token and Spes planet tile.
Cards: Holds all the cards sorted by color (including Automa). Can be put on the table and also has an additional slot in the front for ravager cards.
Ship: Basically holds the ship miniature in place.

As always, let me know if you have any issues or questions.

In case you are wondering about the weird print quality, I was trying out a 0.8mm nozzle with 0.6mm layers and 0.88mm walls to reduce print time. With these setting the whole organizer took around 15h to print.

Print instructions

Printer Brand: Creality

Printer: CR-10S

Rafts: No

Supports: No

Resolution: 0.6

Infill: 10%

Notes:

Used a 0.8mm nozzle.