Service rockers, Voron V2 & VT/V1

Voron VT & V2 Service rockers

CHANGELOG

• 29.04.2023: Braces, to help with som sideways stability i've made a couple braces to "pop-in" to the lower rear extrusion that help prop up the service supports.
• 20.04.2023: Tweaked the logo a bit so it's more pronounced and the MM prints better.
• 18.04.2023: Initial release.

Description:

• I've added the posibility to have the voron logos in an accent color, also fixed a couple faults in the design, added some filets/champfers and redesigned the print-in-place support.
• I'm adding both a plane/solid version (no accent colored logo), and one mulit material.

Printing:

• Default voron settings (i used adaptive cubic infll @40% to save some print time), correct orientation, no supports needed!

Bom:

• 4x M3x8mm BHCS (or SHCS)
• 4x M3 T-slot nuts (T-nut)

The braces:

- - -

In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!