MINI GARAGE DIORAMA FOR 1/64 SCALE DIECASTS - OPTIMIZED FOR FDM PRINTING

Mini garage diorama to display your 1/64 diecasts especially designed for FDM printing. Everything prints fine, and is designed in fonction of layer heights and widths.

Modular, very easy to print, this one requires no supports at all!!
Everything is already placed in the right position.

The kit contains everything you see on the second picture.

Dozens of other dioramas on my patreon. See last picture. 

Kits can be mixed together for more possibilities.

Easy to assemble:
-Install the small wall on the floor (push n slide)
-Install the long wall (same way)
-Use glue for the wall accessories, like the door etc.

Designed for FDM printing with a 0.4 nozzle.
Layer height:
-0.2 for large parts
-0.12 for small parts.

Only recommandation: When doing real small parts, use the lowest temp and speed possible to prevent heat deformation.

If you wanna support my work, join my patreon for exclusive models and the authorization to sell your prints. Full access to the library as soon as you join. 

https://www.patreon.com/PA1_MAKER