Parametric Bottle Holders - IKEA SKADIS - SIDE version
A remix of my SKADIS bottle holder so it can hold the bottle on the side of the board, saving some precious space !!!!
92
447
16
1589
updated April 26, 2023
Description
PDFI remixed my previous IKEA SKADIS bottle holder to make it so it can hold the bottle on the side. This way the bottle is not taking to much precious board space !
Here are the variations I have created so far:
| SKADIS Holder Diameter | Skadis side | Example |
|---|---|---|
| D 40.50 mm | Left & Right | Clipper Lighter gas |
| D 45.70 mm | Left & Right | OIL 100ml |
| D 49.50 mm | Left & Right | silicone/glue cartridge… |
| D 53.50 mm | Left & Right | WD40, Grease spray 200ml/250ml |
| D 58.25 mm | Left & Right | WD40 300ml… |
| D 66.50 mm | Left & Right | Standard BEER/SODA CAN 330ml Standard Spray Paint 400ml (no lip) |
| D 68.75 mm | Left & Right | Standard Spray Paint with aluminium lip |
| D 80.50 mm | Left & Right | Isopropanol 1000 ml |
On the design:
- Holder diameter is 0.5mm higher than bottle diameter for perfect/easy fit.
- For mounting to the board, slide-push-push, follow picture instructions, you can do it !
- No matter the bottle diameter, if you used the standard ikea skadis mount, the bottle will not touch the wall.
On the Freecad file:
- Display Spreadsheet
- Modify cell highlighted in the screenshot
- Add a 0.5mm gap, to allow for some space between walls and bottle
- If model can't generate, delete last chamfer/filet (topology bug)
If you can't work on the Freecad file, I'll be happy to add a variations to that list.
Hope it helps !
Other related model:
Tags
Model origin
The author remixed this model.
