bottle/cup & phone holder

A cup and phone holder that screw mounts below any wooden desk. Fits even big water bottles like a Nalgene 1l/40oz and most phones; even iPhone 14 Pro Max and Pixel 7 Pro. Thick cases might require the upsized version with a 90mm phone slot.

Depth is 70mm with a 25mm protrusion beyond the mounting plane i.e. bottom face of desk.
Phone slot measures 80mm x 15mm or 90mm x 15mm. Cupholder is best at d=93mm but theres a smaller version (d=76mm) that doesn't fit standard cups while still fitting most “tall” style water bottles.

Parametric .f3d as well as .STEP available for all your weird desk/phone/mug sizes.

Designed for countersunk screws (d<3.6mm, head-d<8mm) such as 3x20 TX10 (imperial)

Print 0.4mm nozzle, 0.3mm layers, 2 perimeters, 10% infill. (0.6mm nozzle will increase consumed filament considerably 130g→160g but cut print time 6h→4h). No supports. Bridge optimized: there's a single layer covering the screw holes, simply push out of the way from the top.

Photos showcase the attached 0.4mm nozzle gcode; printed in Prusament Galaxy Black; iPhone 12; DIN cup and Nalgene 16oz/500ml wide mouth.