Filament Spool Rewinder Upgraded - Bambu Lab P1 / X1 / X1C / X1CC

Just a little favour

>>>Less then 10% of downloaded Models get a like.

→ If you like the design, it will be nice if you click on the like button and maybe share your print. 

Newer upgrades are on my new upload

https://www.printables.com/model/515427-awesome-filament-spool-winder-upgraded

a lot Upgrades to fix some issues which i had with the awesome design of the Spool Rewinder from Miklos Kiszely.  

i found some nice upgrades which all has some advantages and disadvantages so i remix it all, and get now a good ridged Filament Spool Rewinder ..

Main Changes are:

(red flashes on the Pics)

-the additional bearing uin the Main Body to guide the axle much better.

-the additional threaded Inserts on the top to fit the cover for the filament spool axle

-the holes in the base of the main Body to fix it on a Table or some other thing..

-the filament carriage sled with slides and additional bearing for the worn gear assembly

-the heavy axis 45mm with steel insert - put into the axle a 4mm hex wrench and cut it..

-Filament Guide with threaded Inserts and longer slides

-the Spool center adapter to use every spool with inner diameter from 40 to 75mm 

V