Solforge Fusion Deck Slipcase

SIZED FOR SLEEVED CARDS, SEE DIMENSIONS BELOW

These are designed to be inserted into a board cardboard card brick as shown in the gallery for a low-cost Solforge Fusion collection organizer. Note they are by default sized for sleeved cards, specifically Ultra Pro PRO-Matte sleeves which measure 66mmx91mm. Box used is a 550 card count and fits about 12 decks.

The .scad file is highly customizable and can be opened with OpenSCAD to change various parameters easily, then export as STL and print. If you use different size sleeves or no sleeves at all you can adjust dimensions there. You can also:

• turn on or off the lattice structure walls
• change the size of the lattice
• turn on or off the deck list and deck name windows
• change the location of the deck list and decklist windows
• etc.

Recommended print settings

• a brim for better plate adhesion, though not absolutely necessary
• no support, though your printer may have trouble bridging across the gap the decklist window creates