Traxxas Slash 2WD LCG Sway Bar Mount For Rear End Anti Roll Bar Hot Racing TE311SLC

As the the mounting points of the rear sway bar are not good enough (IMHO) I designed a holder which seem to function perfect and is easy to install and print.

I used M3x16 screws to mount the holder and the shock tower to the body. For the sway bar mount you can use the screws which are in the set from hot racing.

I have to mention that I cut off the bended ends of the rear sway bar for better fitting of the push rods.

Leave a comment if you have any questions.

Print Settings

Printer:

Cetus 3D MK1

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2 mm

Infill:

at leat 80% or more

Filament:

Black