Sapphire Plus Toolhead a bit of EVA2, VZ-BOT, Hevort with a Clicky Probe NF-Crazy Hotend

My new Sapphire Plus Toolhead for NF-Crazy Hotend.

Please Note that the Bed has to be relocated by about 36mm in y- direction and you are loosing about -10mm in y travel, -5mm in x travel.

Klicky Probe using 7x3x2mm Magnets

Performing pretty well, printing at 25k accel up to 400mms.

[include klicky-probe.cfg] into printer.cfg (As this is my config there is a Homing override inkl. Stepper current set.=

Print Settings

Printer:

Sapphire Plus

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

40%

Filament: