Ender 3 Ikea Lack Enclosure

You need for this:

3x 444 mm x 514 mm x 3 mm Plexiglass or Acrylglass for the Sides (left, right, back) and

2x 220 mm x 511 mm x 3 mm for the doors

6x M3 threaded inserts for the hinges and for the door knobs

2x M3 x 8 screw for the door knobs

4x M3 x 30 screw for the hinges

8x hex wood screw 5.0 x 20 to screw the printed parts to the legs of the Ikea Lack table

4x (or 8x) wood screw flat head 8.0 x 50 for screwing the printed parts to the tabletop

I removed the pressed wood in each of the Ikea Lack legs and repaced it with a 40 mm x 40 mm x 30 mm piece of timber beam. In order to better screw the printed parts to the table legs 

If you want: 8x 5mm x 8 mm Neodym Magnets for the hinges

Assembly similar to the original: https://blog.prusaprinters.org/mmu2s-printer-enclosure/

https://www.printables.com/de/model/4291-prusa-printer-enclosure-v2-with-mmu2s-support-0125

Changed it to suit my needs