Snapmaker J1 Front Load Filament Pass Through

A set of parts to relocate the filament rolls from the back to the inside of the printer.

Print Settings

Printer:

Snapmaker J1

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

15%

Filament:

Overture PETG

Black

Notes:

Files are for the left side. For the right, just mirror the parts (or print in mirror mode on the J1)

Post-Printing =============

Additional Parts

For each side, I used

* 2x 608 bearings * 1x PC4-M10 fittings * 1x 3M Medium Command Strips * ~1.5m of Capricorn reverse bowden tubing. * 2x m3x8 screw * 2x m3 nut

Category: 3D Printer Parts