This is a nozzle brush holder that is designed for an AM8 that is screwed direclty to the 2020/2040 extrusions - and not to the bed.
Print with 1,2mm perimeter and at least 30% infill - since there will be some stress during the cleaning operation. Supports are needed.
Marlin settings when used with an AM8:
// Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_POINT {-30, 40, (Z_MIN_POS + 2 )}
#define NOZZLE_CLEAN_END_POINT { 0, 40, (Z_MIN_POS + 2 )}
Brush size: 1,3 x 4cm
Category: 3D Printer PartsThe author marked this model as their own original creation. Imported from Thingiverse.