Card Game Box

Generates a box and lid based on measurements provided for the different pockets. Default parameters are set to a side loaded Star Realms box as seen on this: http://www.thingiverse.com/thing:2106463

Box dimensions are generated based on the widest pocket and the sum of all pocket thicknesses, and the appropriate number of dividers.

Change Log

Version 1.0

• Initial upload
Adjustable compartments

Version 1.1

• Multiple STL outputs
Optional Lip Fixed clearance issues Fixed finger groove position Added staggered compartments

Version 1.2

• Minimum caddy dimensions

Version 2.0

• Revamped the code base for easier maintenance
Added the ability to increase the lip height and have the cover compensate Added the ability to add the clearance between the caddy wall and the cover Finger groove now also affects the rear compartment Adjustable lip thickness Adjustable cover dimensions

Version 2.1

• Added the option to cut out finger grooves on the bottom of the caddy pockets for when cards lie flat

Sample Configurations

Star Realms v2.0

Variables

minimum_box_width=0; minimum_box_length=0; divider_thickness=1.5; divider_height=60; compartment_width=91; compartment_height=64; wall_thickness_minimum=1.5;

finger_groove_radius=40;

cover_top_clearance=1; cover_side_clearance=.1;

caddy_lip = "yes";

lip_height=42; lip_thickness = 2; Pockets

[ //explorers [compartment_width, 10, compartment_height],

//main [compartment_width, 88, compartment_height],

//player decks x4 [compartment_width, 7.5, compartment_height, -1], [compartment_width, 7.5, compartment_height, 1], [compartment_width, 7.5, compartment_height, -1], [compartment_width, 7.5, compartment_height+15, 1],

//missions and gambits [compartment_width, 7, compartment_height],

//accessories [ 99, 25, compartment_height] ]; MtG EDH

Variables

outputs = both divider_thickness = 1.5 cover_top_clearance = 1 finger_groove_radius = 15 minimum_box_length = 0 lip_height = 60 cover_side_clearance = .1 compartment_height = 97 compartment_width = 70 minimum_box_width = 0 caddy_lip = yes wall_thickness_minimum = 1.5 lip_thickness = 2 divider_height = 80 Pockets

pockets = [[compartment_width, 61, compartment_height]] Sleeved Marvel Munchkins + Mystic Mayhem + Cosmic Chaos

http://www.thingiverse.com/thing:2303785

Variables

compartment_width = 113 cover_side_clearance = .1 minimum_box_width = 0 lip_height = 40 cover_top_clearance = 1 finger_groove_type = none divider_height = 50 minimum_box_length = 0 outputs = both wall_thickness_minimum = 1.5 lip_thickness = 5 compartment_height = 90 caddy_lip = yes finger_groove_radius = 30 divider_thickness = 1.5 Pockets

pockets = [ [108, 60, compartment_height,1], [115, 10, compartment_height,1], [83, 60, compartment_height, 1] ]