FUTURE LED DESK LAMP

This is a desk led lamp , no supporte needed , no glue needed.

🔒 Usage Notice
This design is for personal and non-commercial use. Its use for commercial purposes is not permitted, neither in digital nor physical format.

📩 If you wish to obtain a commercial license, please contact me directly.

⚠ Remember: unauthorized commercialization may result in penalties on Maker World and potential legal action.

Follow me on other social media too: https://linktr.ee/forgia3dlab

If you want a commercial license to sell physical prints, register here:
https://www.patreon.com/c/Forgia3DLab

PLA  0.2 layer , 0.4 Nozzle , 15% infill , 2 perimeters layer , 5 bottom layer , 5 top layers.

you needed any material :

led stipe 10mm 5v 

electrician scissors

Assembly 1-insert the connector into the central slot and bring it out from behind. 2-pass the LED strip inside the groove and go all the way around the lamp to the starting point, then cut the excess. 3-connect to a 5v adapter or a powerbank and enjoy.

Please share your make and feedback. thanks