IKEA BROR wheel / caster mount

Wanted to add wheels to my IKEA BROR system (65x55x190cm; model 294.717.59 in my case; uses BROR posts model 103.332.87), so made this mount. No modifications needed in BROR system itself.

Printed in MK3S+ from PETG, 0.3mm layer, 4 walls, 30% infill (you can use your own parameters).

Wheels have ~ 37x46.5mm base plate with 33.8mm and 23.8mm spacing between holes center points. ( https://archiwum.allegro.pl/oferta/komplet-kol-fi-40-mm-kolo-kolko-kola-nie-rysuja-i11331349181.html )

Wheels mounted using four M5x10mm hex bolts and self locking four M5 nuts for each wheel (bolt on top, nut on bottom - this orientation because top area needs to be flat for bror leg).

Fusion 360 and step source files attached.

Edit:

Stronger (v2) version added.  Printed (on X1C)  with PETG using “0.28mm Extra Draft” mode and 8 walls. M5x12mm/14mm.

Thank you for your support. If you found the project helpful, please buy me a coffee and see you in the next projects.