hamster wheel

Spinning wheel for rodents. To make the reel you need: 3D print parts, wooden boards 18x1.5mm (any length, I used 65mm) - 32 pieces, two DIN 608 bearings, ISO 4762 M3x16 screws, M3 nuts, parallel pin ISO 8735 8x30, ISO 4014 M5x30 screw. For durability of the structure, it should be glued. Use an adhesive that takes no more than 15 minutes to set. Installation is time consuming and requires patience.

(Wood board- make it from wood or print it ).