Print-in-place fish-eye rod end for fischertechnik

A print-in-place fish-eye / ball joint bearing rod end for fischertechnik 4 mm axles.

Requires an original fischertechnik Spannzange Z22 m0,5 (#35113) for fastening.

The maximum angle between the two axles is

• ca. 130° without fixing
• ca. 120° with two pieces Abstandsring 3 and
• ca. 110° with two pieces Klemmbuchse 5.

Important: Print this in the default orientation, i.e. laying flat with support or else the print-in-place bearing will stick. The thread is intentionally missing at the top and bottom to allow for a clean print in this orientation.

See also https://www.thingiverse.com/thing:5931102 and https://www.thingiverse.com/thing:5930154 for alternative designs.

Please consider leaving a "like" as a token of appreciation for my work.

Find my other fischertechnik designs here.

Category: Construction Toys