Anet A8 Extruder Filament Guide

I designed this because loading the filament on the A8 is a pain.
on the lever i put a small piece of Teflon tube.
The heat break is mounted so that it is equal with the chamfer as you can see on the picture.
Its not perfect but its better than without it.
You have to turn it upside down for printing.

When you insert the filament press the button only as far that the filament can glide between the roller and the gear. I

It is not possible to use the change filament option of repetier in the current state,as it pulls the filament to fast, the filament get deformed on the roller, and the filament wouldn't fit to the upper hole

V2 tightened gaps and tolerances

V1 and V2 are working also with flexible Filament.