16mm Vape Stem Funnel / Stand

A small funnel for filling vaporizer 16mm stems, filling doob tubes, or as a stand. The overhang is designed for 16mm outer diameter and 14mm inner diameter, which fits Tinymight stems perfectly.

Extra Details

• Modeled in Fusion 360
• Tested on Bambu X1C with PLA and PETG
• Suggested settings
  • 100% infill
  • 0.12 layer height
  • 0.15 first layer height
  • seam aligned
• Uses 4.66g filament
• I suggest lightly sanding with fine grit sandpaper to smooth out the inside of the cone, but don't sand the bottom of the funnel, the print lines provide a little friction that keeps the funnel in place nicely