This Uno Box is based on Rugged Box (Parametric) made by @Whity. I modified the size and put the UNO logo on the lid so you can print in multi colours. Inside the box is a UNO cardholder, which you can take off and put on the table. So you will have a tidy stack of Uno cards.
NOTE: it fits a standard UNO card deck (112 cards with a size of 86 x 56 mm each).
You only need 6 M3x30mm screws, and no glue is required.
I printed it with a Bambulabs X1C printer and all using Eryone PLA.
The author remixed this model.