SV06 Plus Bed Cable Strain Relief

This part replaces the one supplied by Sovol with the SV06 Plus and adds an extension off the back to provide additional support and also angles the cable up slightly to keep the cable from rubbing on the rear frame.  Two zip ties are required to mount it - one to secure it to the bed and the other to keep the cable in the channel within the extension.  The forward zip tie that mounts it to the bed should be tight to minimize movement, while the one on the extension does not need to be very tight, only enough to hold the cable in the channel.  This part is similar to others created for the SV06, but the cable sheaths are different and this model has a wider channel to accommodate the cable for the SV06 Plus.

There are two models to select from.  One requires support on the section that angles up in the back, and one does not.  Pick whichever suits your fancy.  The file names end with "NeedsSupport" or “NoSupport”.  The only difference is the shape of the extension where it meets the bed.

This design was influenced by the original part supplied by Sovol and by the design by @ShinIshiSou.  It also pairs nicely with the Heatbed Cable Support by @rogerquin_304616, which also fits the SV06 Plus.