Face mask case with magnetic lock

Designed by myself:
Mask case with lettering to transport face masks in everyday life.
Additionally you need 2 magnets (15x6x3; holding power: approx. 800g is sufficient), which are integrated during printing (see printing instructions).

In addition, a mask case without lettering is available.

printed on Prusa i3 MK3s

Please leave a like ;-)

Print instructions

Material: PET-G
Filament manufacturer: extrudr
layer height: 0.2mm
Slicer used: PrusaSlicer-2.2.0
Printer used: Prusa i3 MK3S
Printing Plate: Textured PEI Powder-coated Spring Steel Sheet
printing time: approx. 7h

1. print lettering
2. print mask case

Insert print stops in the slicer:
at 1mm (only with lettering) => to insert the printed lettering

at 9.2mm => to insert the magnets (glue magnets with super glue for safety) with Prusa i3 MK3S not necessary

!!!Attention!!!
Pay attention to the alignment of the magnets of the upper and lower part, not that they repel each other when closing the mask case ;-)