Simple Tripod lamp to work with 28x28mm wooden legs from your local hardware store.
Designed after I found the Tripod solutions out there often too complex to print.
This 2 piece design can have a little wobble, but works for my needs and prints relatively fast and easy.
In addition to the 3D printed parts I used:
- 3 x wood beams 28x28x1000 mm
- 1 x E27 LED bulb
- 1 x E27 lamp fixture with cable and switch
- 1 x lampshade
Please be safe, if you build this! Think of potential fire hazards and choose and treat all materials accordingly! I cannot guarantee for anything.
So don't build a lamp unless you know what you are doing!
The author marked this model as their own original creation.