Dragon Wales 3-Gang Light Switch Cover

Print

    Filament - Inland PLA PRO Black and Silk Gold

• Diameter - 1.75mm
• Extrusion Multiplier - 1
• Density - 1.25
• Nozzle Temp - First Layer - 219*C , Other Layers 219*C
• Bed Temp - First Layer - 57*C , Other Layers 57*C

    Infill

•  25%
• Rectilinear
• 600% anchor
• 100% anchor length
• Top - Archimedean Chords
• Bottom - Concentric
• Combined every 20 layers

    Supports 

• - Gcode has supports painted on the middle 0.0375" for screw spacing with Top Z contact set to 0.2 Detachable

     Misc Settings

• Solding Layers - Bottom 2, Top 4
• Perimeters - 3
• Layer Height - 0.15mm
• First Layer Height - 0.25mm
• Thick Bridges - Yes
• Detect bridging perimeters - Yes
• Fill Gaps - Gaps
• Seam Position - Aligned
• Perimeter Generator - Arachne
• Fuzzy Skin - No 
• Ironing - Enabled , All top surfaces, 12% Flow Rate and 0.1mm between ironing passes (Also offer a iron disabled version as well see below in file notes, decreases print time)
• Skirt  5 Loops at 6mm distance and 1 layer height

    Speed Settings

• Perimeter - 60mm
• Small Perimeter - 15mm
• External perimeter - 50%
• Infill - 80mm
• Solid Infill - 20mm
• Top Solid Infill - 12mm
• Support material - 60mm
• Support material interface - 100%
• Bridges - 60mm
• Gap Fill - 15mm
• Ironing - 20mm - If enabled
• Travel - 130mm
• Z - 0mm
• First Layer Speed - 30mm