RCBS Rock Chucker II spent primer guide

This is a Remix of https://www.thingiverse.com/thing:3916949

Made it longer to fit the RCBS Rock Chucker II press.

This is useful if you want the primers to fall to the bottom of the ram and prevent them from spitting out the front of the ram and press.

Also, made the magnet holes deeper for 5mm by 5mm magnets.

Print Settings

Printer:

Voxelab Aquilla

Rafts:

Supports:

No

Resolution:

Infill:

20%

Filament:

Any