unINDUSTRIAL keyboard

Easy to print unibody split keyboard. 

You need:

• 44 switches
• Pro Micro or other microcontroller with the same footprint
• 9 pcs. M6x14mm buttonhead screws. If you use the dampener, you need longer screws
• 9 pcs. M6 nuts
• 44 pcs 1N4148 Diodes
• wire
• soldering equipment

The included dampener file is totally optional. Its intended to be printed out of flexible filament to decouple the two case halves and mute the sound a little. You can print it out of regular filament though and use it as an accent piece. Just keep the screw length in mind.