THE NOZZLE holder (gridfinity)

This is a one nozzle holder that i designed that holds the one special nozzle you possess.

It is inspired by the iron man arc reactor case and the one sd card holder designed by atucom 

• support is needed for overhangs over 70° and the places that is printing in thin air.
• should be printed with fine layer heights 0.5-0.7mm so that the words are readable, variable layer height setting could be used to reduce print time.

• magnet should be press fit (depending on print quality ), if it doesn't, a drop of superglue will do the trick 

Have fun printing ! 

comment if you want a version of this for the revo system nozzle. 

The gcode file i attached is using variable layer height, 0.8mm for the details and 0.25 for the less detailed parts. ( at 195 °C using 14g of prusament pla )(1h58m print)