Ender 3 Pro CR-Touch Mount
I designed this to mount a CR-Touch in almost the exact same position as the bracket that comes with the CR-Touch.
19
487
1
1440
updated April 11, 2023
Description
PDFThe bracket that came with the CR-Touch did not fit with my direct drive mount so I designed one that did. This mount only requires 2 M3x8 screws, and the holes are designed to be self-tapping.
The direct drive mount that was used. https://www.thingiverse.com/thing:3589452
Print Instructions (That I used)
- Perimeters: 3
- Wall Thickness: 2.48mm
- Layer height: 0.16mm
- Infill: 31% Triangular
- Speed: 40mm/s
Support Instructions
Supports are not required for the holes in the bracket and are not required at all if you print the “no support” version.
- Style: Grid
- Z-offset: 0.18mm
- Pattern: Rectilinear
- Pattern Spacing: 2mm
Tags
Model origin
The author marked this model as their own original creation.