spiggytech ASRock A380 Challenger ITX replacement shroud

Hello, 

Enclosed is a custom replaceable shroud for the ASRock A380 Challenger ITX. I found the original a bit boring and wanted to match the design to my case. 

Assembly Instructions: 

• Print in PETG @ 15% infill Flat sides down. 
• Do not remove the heatsink!
• Remove original shroud by removing the fan screws(3), followed by the shroud screws(5). 
• Install the main body (the cylinder) to the heatsink via shroud screws(5)
• Then attach the fan via fan screws(3)
• Apply small dab of CA glue to the ring of the shroud. And connect to the main body
• Enjoy how it looks because it's badass and you're badass