Tronxy X5SA V6/Orbiter Mount

if you happen to have this hyper specific setup for your TronXY X5SA this is the mount for you.

E3D V6 Volcano

Creality CR Touch

Dual 5015 part cooling fans

3010 Heatsink fan

Sensorless homing.

I have it split into 3 parts, the 2 main parts should be printed out of ABS and the fan brace can be printed in a filament of your choosing

Parts are designed for m3 4mm heat set inserts

No parts should require supports, I printed them in the Voron standard: 

4 Walls, 5 top/bottom 40% cubic infill, forced 0.4 line width.

you will need to adjust your nozzle min positions as well as your probe offset, the measured offsets in Cad are X +48.56mm Y +0.06mm but it is best practice to measure this as printing tolerances are built into the models.

There are 2 versions of the V6 Clamp 1 which has a mount for the 3010 fan and the other if you want to use the included duct that comes with the V6 hotend. 

The Fan Brace is entirely optional, but helps with sensorless homing.