Simple model to secure and rise a MatekSYS M8Q-5883 GPS module.
Printing: .2-layer height, no supports, PET-G for riser
Tray: default .2mm settings seem to work well
Riser: increase infill to 25-50% I used 25% gyroid with good results.
Install: install GPS module into tray so both connections are accessible. Secure in place with hot glue.
Install the riser onto the body, screw holes are for M4 and spaced 20mm apart. add hot glue to the hole on the bottom of the tray and quickly push the tray down on the riser and align.
The author marked this model as their own original creation.