Bambu Lab Fan Housing - Changing the Color of the Logo - For Full Color Coverage Filament

Hello Everyone

I am sharing a design that changes the color of the print head fan housing logo. Compared to other available designs, mine works with any filament with full color coverage. Pictures do not show the full effect. The colors are actually darker (I don't have a camera that would take a perfect picture). And what is your favorite logo color and design version?. My definitely green and version 1
 

When you complete the project, please share a photo and a comment. Thank you and have a nice day.
 

Update - 14/04/2023
I did some modifications and more testing. As of today, 3 versions are available. Everyone will choose something for themselves. Below and in the photo gallery details of each version. 

• Version 1 - Use file number 1
  Changes to the selected logo color + highlights the printer chamber to the original color, i.e. white
• Version 2 - Use file number 2
  Changes to the selected logo color + highlights the printer chamber in the color of the logo 
• Version 3 - Use file number 2 and 3
  Changes to the selected logo color + does not highlight the printer chamber with the logo color
   

File number 3 - Also note that the outer insert has shorter side wings than the rest of the housing (you can see it in the photo gallery). They must be facing downwards when assembling.
 

IMPORTANT - READ:
Only use filaments with full color coverage. This design is not usable with clear filament. The outer insert must be printed only in black - it is used to prevent the colorful Logo from illuminating the entire chamber (it cannot be used as a color change - only the inner insert is used to change the color). The photo gallery shows the correct execution of the project and its assembly.

Characteristics :

• Works with any filament with full color coverage, not just transparent colors like other designs
• Three lighting effects
• The entire project uses only 3g of filament
• Easy assembly - just unscrew two screws
• Printing and assembly takes a total of 10 minutes

How to print ? :

• Material : PLA Full Color (Does not work with transparent filaments)
• Layer Height : 0.2mm
• Speed : All 80mm/s
• Support : No
• Brim : No
• Depending on the filament you have and its shrinkage, print on a scale of 99% to 100%