Hello so I wanted to have a brake that's closer to a load cell for the g27. I really liked the design of the Truebrake by AXC sim, but knew there had to be a way to design it for 3d printing. So here is my take on his brake mod. When i first installed it i didnt like the feel of it but after a few laps and make sure your rig pedals and seat are very sturdy. since its using a potentiometer it will work directly with the g27 or any of logitechs g25-29 and the pc variants. so will still work for ps3 or pc or xbox. game will see the same signal as the stock pedal.
So on to the parts you will need.
1- 8mm rod x 84mm length
1- lmu8 bearing
1- spring found on amazon or auto parts store.
doorman item 03107
3- idler return spring from prusa mk3
15.28mm long 5mm diameter
https://shop.prusa3d.com/en/spare-parts/599-idler-spring.html
1- linear motion potentiometer bourns inc. 3046L-2-103
1- m3x10mm screw
1- m3 square nut
ill be posting a video of how to assemble it hope you enjoy it.
print without supports petg for strength.
and position the way the 3mf shows.
The author hasn't provided the model origin yet.