Bambu P1P feet

Hello! 

This is my first make of part and first make I publish here. The feet is designed in Fusion 360. 

This is a more stable feet for Bambu P1P. It can be mount in the original places, just remove the original feet. 

As material you can experiment with any flexible and the infill percentage. My first made was with TPU Hardness: 64 Shore D, but it is not so soft enough. The leg when was ready have hard surface and not enough traction with the base on which the machine was placed, the feets were sliding on the surface. You are free to experiment but from my view please use material lower as softness from 60 shore if you want to try whit this design. 

I have a new leg design that is based on this model but optimized for use with the original Bambu P1P legs which are listed as an anti-vibration upgrade and can be bought from the Bambu shop. Alas, the original anti-vibration legs of the Bamboo are too soft and bends on sides, they wobbles a lot when placed on the machine. So take a look at the new design whit the original Bambo legs.

If you like this design you can buy me beer - paypal.me/ANeykov