Logitech G Pro Wireless (x-superlight-wireless) mouse case - Rugged Box (Parametric)

Perfect for traveling so that your precious mouse doesn't get damaged.
76
466
6
3941
updated April 9, 2023

Description

PDF

Hello. I have a Logitech G Pro Wireless (x-superlight-wireless) mouse case here. This is a remix of “Rugged Box (Parametric)”. Easy to print. Durable but not waterproof. Perfect for traveling so that your precious mouse doesn't get damaged.

 

Component:
 

  1. 6x M3 30mm screw.
     
  2. Two neodymium magnets - Height - 3mm Diameter - 6mm (they are not needed, but the mouse then attaches itself to the right place and stays there)
     
  3. Foam to keep the mouse in place - Made for foam from the original packaging which is then glued to the top cover. (if you no longer have the original box, you need foam about 5mm high)

 

Installation:

  • Magnets- If you want to use magenta, you need to insert them into the cover during printing at a height of 3.60 mm using the print pause in the g-code. Pay attention to the correct polarity of the magnet!
  • Foam - You simply peel off the foam from the original box and stick it to the top cover in the marked circle using adhesives.
  • Then screw everything together and you're done.
  • The seal does not need to be printed! But it is in the original version, so I decided to add it here as well. 

 

If you decide to print the box, I would be delighted to see your photos :D.

Tags



Model origin

The author remixed this model.

License