Sonic Pad Bracket and Sonic Pad Bracket Base. Two assemblies required!
Use M3 x 8mm long and M3 nuts to connect bracket to bracket base. Two M3 nut press into Bracket. The M3 screws will screw into the M3 nuts. I used two M5 and extrusion two t-nuts to connect two of these bracket assemblies to top extrusion on the End 3 S1 Pro. Two M3 screws per bracket will attach the brackets to the Sonic Pad. This will straddle the Spool holder and the filament runout sensor. The Sonic Pad rests above the light and in clear view.
PLA .2mm layer height, 20% -40% infill.
The author marked this model as their own original creation.