Prusa MK2 - MK4 Y-axis belt tension

A quick and easy way to adjust the table strap from the printer. No need to adjust screws

10h 27m

3× print file

0.20 mm

0.40 mm

91.00 g

2029

updated April 8, 2023

Description

The front panel must be replaced with the original one. It is strong enough that it does not bend when stretching.

Use an Allen head screw for the knob:
M5x30mm

A 5mm washer should be added between the knob and the front panel

In addition, the front panel is equipped with an empty profile to facilitate the assembly of the printer.

Guides have also been added for convenient, simple installation of Y-axis rod holders

The author marked this model as their own original creation.