Sparky the Adorable Robot

Say hello to Sparky the adorable robot! A cute little friend that can keep you company while you work.  Make Sparky your own by printing him in any colour you like!

Instructions

• Printing should be pretty easy. I recommend using a small layer height, to preserve the finer detail/curves in this small sized model. Most parts will print without supports, but should be used for: Head (Front), Body (Front), and Head (Back). 
   
• Brims are strongly recommended for all of the head and body detail parts.  The surfaces with brims will all be hidden when the model is assembled.
   
• Keep an eye on the direction of the Head Plate when assembling the model.  The holes for the antenna parts should be towards the backside of the model. 
   
• Also keep an eye on the direction of the Body Plate and its buttons.  The plate has a curve which should match the curve of the body when assembled. The buttons in the plate also come in two different heights so that they can match the body curve.
   
• The 8mm Button and 10mm Button on the body detail also have a curve to match the body, so make sure you line up those buttons in the correct direction as well.
   
• You will need to print two copies of the Antenna, and Side Ridge parts