Apple TV Remote Case

Apple tv remote case I have designed.

Print file for Prusament PETG and PLA is provided for printers brand Prusa MK3, S & S+. Different printer or filament brand may give a bad print.

Feel free to ask if there is any questions or requests.

Print instructions For STL files

Make sure you use correct print orientation with the charge port cut out facing the print bed. Correct print orientation is shown in pictures. I used a brim for better adhesion to print bed. I used variable layer height with 0.1 at parts with overhang/curvature and 0.2 at the rest of the model. Print without any support, it is not needed. Good luck!