Shallow Storage Box

This is my design for a basic storage box.  It was remixed to be shallower for smaller objects.  It has clips that seal the lid to the box.  The total profile of the box is 200mm x 204mm x 45mm(both base(35mm) and lid(10mm) together).  There are four compartments that are 42mm x 93.5mm and four that are 45.25mm x 100mm.  No supports are required if the lid is flipped during slicing.  1mm tolerance built in.  I do not know what settings to use for printing it, but generic settings should work.

Decreased depth of box