DripWaterCollector

Drip Water Collector with the Option to use Gardena-ish connectors to use a shared outlet

I have an issue with the roof of our winter garden if it's raining a lot. So instead of fixing the roof it's so much more fun to play around with the 3D-Printer.

So here you can see and share a modular drip water collector where you can have multiple collectors connected to one outlet….so you can take care of different areas where water is pouring out….

Collector module 

Shared Outlet

The Collector module consist of 3 parts:

- cover

• cover
• body
• stand

Printing:

Print the cover with grid-ish inlay and no top and bottom layers to get it like a sieve where the water drops can fall through and it's “splashes” from the impact stay contained 

… if it's getting hot and sunny at your location think about using some more robust material or use PLA

Credits to @Mike who provided the Gardena-ish Plug which I reused in the collector module

update 26.10.2023

• added a smaller outlet (so I can close the door and our cats can't leave) 
• added a collector with two gardena-ish plugs
• a matching stand with two cut outs

I'm using the Gardena-ish Plug by Mike to connect different water collectors with one outlet