EDC Stand

EDC Stand/Tray

This stand is super strong and efficient to print thanks to utilizing print direction, and requires no supports, hardware or glue. Designed to hold:

• A wristwatch/smartwatch (tested with Samsung Watch 5 Pro)
• A modern smartphone (tested with Samsung S23+)
• A regular sized wallet (up to 40mm thick)
• Keys/change/other loose items

Requires 2 prints:

1. Base (~6 hours)
2. 3 accessories (~6-7 hours)

The 3 accessories easily slot into the base with generous tolerances that require no cleanup. No hardware or glue required.

Print settings:

• eSun PLA+
• 0.3mm layer height
• 0.4 nozzle/line width
• 2 x walls, 3 x top/bottom (base can be printed with a 2 x bottom layer to save time if your printer bed and z-offset are well tuned)
• 60mm/s print speed
• 10% cubic infill
• No supports, no brim/skirt