Connected Battery Stand - CR2032 Type

A remix of this great model by @ceres to expand the “ecosystem” for the commonly used CR2032 battery.

I designed this stand so it could be attached to the side of the “regular” AA/AAA batteries stand.

It fits 10 CR2032 batteries with enough space in between to allow for easily grabbing them. 

You could also conveniently use it for storing 2 CR2016 batteries in each cell, since they're exactly half the thickness of the CR2032.

I printed mine with a 0.3mm nozzle at 0.16mm layer height at a relatively slow speed to try to preserve the “velcro” details as much as possible. No sanding or filing was required.

Important! Please read before printing!

As per u/Exception-Rethrown's advice, it's best to check the resistance of your filament before starting to print, because batteries might end up drained if resistance is not high enough.